Change Mode Type on ZyXEL PK5001Z
1. Open a web browser and go to http://192.168.0.1.
2. Do the following:
- Enter the Administrator Username: admin (default)
- Enter the Administrator Password: (located on the bottom of the modem)
- Select "Apply".
3. Select "Advanced Setup".
4. Select "Broadband Settings".
5. Select "VC-Mux" for Encapsulation Type.
6. Select "Apply".
7. Select "WAN Settings".
8. Select PPPoA.
9. Do the following:
- Enter the PPP Username
- Enter the PPP Password
- Confirm PPP Password
- PPP Auto Connect - Enable
- PPP Credentials Not Required - Disable
10. Select "Apply".
